How To Make CBD Vape Oil


Buy CBD Oil Online

The global vaping industry is taking the world by storm, rapidly expanding across the globe. In just a few years, CBD vape juices and e-liquids have become dominant products on the market. It seems that people simply adore vaping CBD for the most obvious reasons. It’s fast-acting, discreet, delicious, doesn’t get you CBD vape oil: Can you smoke it? Is it vape juice? What are the benefits and effects? Find out how to make CBD vape oil and what ingredients go into it.

How to Make Your Own CBD Vape Juice

The global vaping industry is taking the world by storm, rapidly expanding across the globe. In just a few years, CBD vape juices and e-liquids have become dominant products on the market. It seems that people simply adore vaping CBD for the most obvious reasons.

It’s fast-acting, discreet, delicious, doesn’t get you high, and offers a range of potential health benefits. According to CBD oil experts, Ministry of Hemp , the thing with CBD oil for vaping is that the oil goes straight into your bloodstream, allowing you to feel the effect almost immediately.

However, this increasing popularity made CBD vape juice quite expensive. Fortunately, you can save some cash on the side by learning how to make your own CBD vape juice, so let’s get down to it right away.

PG and VG: Finding Your Ratio

The journey to making your own CBD vape e-juice of the highest quality starts with finding the proper PG/VG ratio for your taste. Propylene glycol and vegetable glycerin are two main compounds found in every e-liquid.

These are the most popular and top-rated carrier oils you need for your CBD juice. There are some differences between the two; PG offers a higher liquid-like consistency, while higher VG percentages make for a smoother vaping experience.

Since you need the CBD-isolate to complete your vape juice, you can’t use VG only as it won’t dissolve the isolate. Therefore, you’ll need a higher ratio of PG for your CBD vape juice to ensure the isolate gets properly dissolved within your e-liquid. Aim for 70/30 PG to VG for the best solution.

The Necessary Ingredients for Making CBD Vape Juice

Now, since you have your PG/VG ratio under control, let’s see what equipment you need to start making your own vape juice. The good thing is that you can find most of the necessary items at a local supermarket or online. Here are the essentials:

  • Gram scale
  • Clean syringe
  • Fine mesh strainer
  • Mortar and pestle
  • A pot of a medium size
  • Small container
  • Glass bottle
  • A dropper

Basic Steps for Making Your Own CBD Vape Juice

Here are some basic steps for making your CBD vape. Note that this recipe is made for 0.5g of CBD isolate. You can tweak it as you become more experienced, but we recommend that you start small and slow and work your way up. Here are the steps:

  • Put your CBD isolate crystals on the gram scale and measure 0.5g;
  • Use a mortar and pestle to grind your CBD isolate until you achieve a fine powder consistency;
  • Measure somewhere around 0.5-1 ml of terpenes and mix it with your 70/30 PG/VG ratio to get around 30 ml of total vape juice;
  • Take a small mixing container and place your vape juice into it;
  • Mix your solution with ground CBD isolate powder;
  • Secure the lid of the container;
  • If you have a vortex mixer use it to properly even out the mix or give your mixture a few shakes by hand;
  • At this point, you should have a pot with heated water where you will submerge your mixing container;
  • Keep the temperature on medium-high heat;
  • Turn the heat to low at the boiling point and put your container in the pot;
  • Remove the container after about five minutes;
  • Give it another shake;
  • If you still can see CBD crystals, repeat the previous two steps;
  • If you can’t see the crystals, allow your vape juice to cool for at least half an hour;
  • Once cooled, take a glass bottle and use a fine-mesh strainer to filter through your vape juice.

Friendly advice: Please, do not microwave your CBD vape juice under any circumstances. It won’t do you any good, and it will only destroy the precious ingredients.

Terpenes You Should Use

Terpenes are in charge of the flavor of your vape juice. So, before you can choose the right terpenes, you need to decide on the flavor you want in your vaping session. Since terpenes are a bit of a complex subject, we have a few recommendations for you:

  • Top terpenes for daytime – beta-caryophyllene (smoky, black pepper, spicy), humulene (floral, citrusy, hops), alpha-pinene (fresh, earthy, pine), limonene (lemon, sweet, citrusy, tart);
  • Top terpenes for nighttime – myrcene (fruity, musky, mango), linalool (herby, floral, lavender), menthol (icy, refreshing, minty), terpinolene (floral, apples, sweet).

Optimal Shelf-Life Tip

If you want to achieve the best optimal shelf-life for your CBD e-juice, make sure you store it in a dark and cool place. If it’s sealed tight in a dark glass bottle, it could last up to 12 months before it starts losing its potency.


With all these useful tips, you should be making your DIY CBD vape juice without any problems in no time. Always use the best, highest quality ingredients to make sure you stay healthy. Now, the only thing left for you to do is to buy a decent vape pen to vape your CBD juice like a real professional.

See also  Water Soluble CBD Oil Brands


The first step is to make sure you have all the necessary items. They are: -CBD oil -A vape pen cartridge with a mouthpiece and battery -Liquefied glycerin or propylene glycol (PG) -A dropper bottle for mixing the ingredients together -Distilled water, if using PG as an ingredient -Vegetable glycerin, if using VG as an ingredient The second step is to measure

Vape Militia January 31, 2022

My local vape store owner told me that Terpenes are not necessary, and instead I can add 10ml PG based Aroma to 100ml CBD solution. Is this right?

How To Make CBD Vape Oil: Easy DIY Recipe

Schooling yourself on how to make CBD vape oil puts you in line with the innovative world of modern technology. Vaping has changed how people ingest their CBD and has probed into the way individuals smoke in general.

With so many other ways to consume CBD, vaping proves to be one of the most effective. CBD vape oil benefits draw regular CBD users and vapers to the scene. It’s a convenient way to have the best of both worlds.

Join us as we discover what exactly is CBD vape oil and an easy DIY CBD vape oil recipe for you to try at home.

CBD vape oil and weed leaf

What is CBD vape oil?

CBD vape oil, aka CBD vape juice, refers to the extracts from cannabis added to carrier oils. It’s a rather misleading dub since the liquid doesn’t contain any oil. The correct name for it would be CBD vape juice. CBD e-cig oil is a term used for any vape juice that contains CBD instead of the nicotine content it usually holds.

Its non-psychoactive properties won’t give you a CBD vape oil high. Vaping benefits you in other ways, which relax your body and mind from stress and anxiety.

So, what is CBD vape oil? To better understand the properties of this product, let’s break down the two aspects that make up the term CBD vape oil:

Cannabidiol (CBD)

Better known as CBD—it’s a cannabis compound that doesn’t contain any psychoactive properties.

Carbon dioxide is used to extract cannabidiol molecules from marijuana leaves and flowers. Adding a carrier oil reduces hypersensitivity properties for topical applications and improves absorption.

Oils are the most natural forms of cannabidiol, but some are also sold as extracts or capsules. Using the best CBD vape oil for pain is becoming more common among CBD enthusiasts.

CBD products come in three different forms:

Full-spectrum CBD extracts have small volumes of all the components of a cannabis plant. It contains traces of THC—usually up to 0.3%
Broad-spectrum These CBD extracts don’t contain any traces of THC but still have other plant components like the terpenes.
CBD isolate This is a pure CBD product that doesn’t hold any other properties from a cannabis plant.

CBD oil on its own isn’t suitable for inhalation through any vaping device or any other smoking device for that matter. In case you’re not familiarized, vaping is when you inhale vaporized smoke through a handheld electronic device.

Adding CBD oil to carrier fluids like Propylene Glycol (PG) and Vegetable Glycerin (VP) sets it up to be vaporized.

  • Propylene Glycol: Has a liquid-like consistency and assists with carrying the flavor in the vape juice.
  • Vegetable Glycerin: Also known as Glycerol, enables the production of vapor when exhaling, which allows for smoother vaping.

CBD oil for a vaporizer is specifically blended for vaping and is solvent in water, thus creating the vapor exerted by the device.

Effects of CBD vape oil: What does CBD vape oil do to you

The CBD content in vape oil (vape juice) has various non-psychoactive effects on the body. When CBD vaporizer oil is prepared with CBD isolate oil, it doesn’t contain any traces of THC.

The legal limit of THC present in a vape is 0.3%. At this percentage, even if CBD e-cig juice contains up to this amount, it still won’t give you a buzz.

CBD vaporizer oil swiftly enters the bloodstream upon each inhale. This allows for a sudden sense of calm and relaxation to overcome the body and mind.

CBD vape oil benefits

Vaping CBD oil benefits are the main reason why people choose to use cannabidiol in vape juice. It has higher bioavailability (absorption rate) compared to all the other ingestion methods.

CBD products treat anxiety and pain. As reported, the benefits also include the therapeutic relief of symptoms from:

  • Seizures
  • Insomnia
  • Nausea
  • Acne
  • Parkinson’s disease
  • Alzheimer’s
  • Multiple sclerosis
  • Psychosis
  • Neurodegenerative conditions

Check our reports to keep learning about CBD for anxiety and CBD for pain.

How to use CBD vape oil

If you’re new to vaping, the best options to start with are disposables, cartridges, and pods. Refillable e-cig pens are advanced and suitable for more experienced vapers.

Below are four types of vaping devices to use for your CBD vaporizer oil:

  1. Disposable CBD vape pens: A first-generation device best suited for first-time users. Also known as Cig-a-likes. They’re small, lightweight, and the most cost-effective. These devices are already filled with CBD vape juice and should last a good few puffs before throwing them away.
  2. CBD oil cartridges: An effortless way to get your CBD oil vape benefits. They’re cylinder-shaped devices that also come pre-filled with Cannabidiol e-cig oil.
  3. Refillable CBD vape pens: These devices are rechargeable, and you fill them up with your own CBD vape juice (oil). They generate a lot more vapor (smoke clouds) and flavor than disposables. Even though they require some upkeep maintenance like changing the coil and cleaning the tank, it saves you money in the long run.
  4. Pod mods: An upgraded version of cig-a-likes and the best-suited device to use for DIY CBD vape oil
See also  5000 Mg CBD Oil

Can you smoke CBD oil in a vape?

One question that many consumers ask is, can you smoke CBD oil in a vape? The simple answer to that is no; you can’t use CBD oil in vaping devices. CBD tinctures, including oils, are used for topical applications or edibles, such as placing drops in your mouth or adding it to your tea.

Inhaling any oil deposits directly to your lungs could be harmful. Exposing CBD oil to temperatures higher than 320℉ burns oil inside the equipment, causing it to lose potency and leave an unpleasant taste in your mouth if inhaled.

You can’t use CBD oil for vaping at all, the same way you can’t orally consume CBD vape liquid. CBD vaporizer oil contains CBD content but not actual oil.

Let’s clarify and compare the different terms used:

Type Description
CBD oil Drops used for oral or topical medical ailments.
CBD vape oil Another term used for a liquid that gets deposited into an electronic handheld device but doesn’t contain oil.
CBD vape juice / e-liquid The correct term to use for a CBD liquid deposited into the vaping device.

How can you vape regular CBD oil?

As mentioned earlier, you can’t inhale regular CBD oil.

If you’re not opting for the DIY CBD vape oil and choose to buy your CBD oil separate from your e-liquid, make sure that the product is suitable for inhaling and not ingesting. This is the only way to use CBD oil for vaping.

How often can you use CBD vape oil?

Determining how much cannabidiol vape oil you can use within a day is all reliant on the primary ingredient—the CBD content. According to studies, up to 1500 mg of cannabidiol a day is enough for the body.

Taking too much CBD can cause unpleasant reactions like nausea, dry mouth, diarrhea, upset stomach, and general disorientation.

It’s important to know how often you can use CBD vape oil. The usage amount is measured predominantly according to your body weight. Below we’ve broken it down:

There isn’t a ballpark figure of the correct amount that you can consume. Use this chart to determine what the correct dosage for you is, based on your weight.

Dosage level 80–150 lbs 151–240 lbs 240 lbs
Low 12 mg 18 mg 22.5 mg
Medium 15 mg 22.5 mg 30 mg
High 18 mg 27 mg 45 mg

Regardless of your weight, start with a low dose and gradually increase it as your body becomes accustomed to the cannabidiol.

You can check the label on your CBD vape oil (juice) when purchasing it from an online store or dispensary to see how much CBD each puff contains. You can consume it as often as you like as long as you don’t go above the recommended amount.

How to make CBD vape oil

Buying CBD vape oil (liquid) is convenient, but there’s something about making your own that adds that extra spunk to your product.

Learning how to make your own CBD vape oil is beneficial to your taste buds and your pocket. You control the number of cannabinoids that go in, the type of flavors, and how much cloud you expect to see on an exhale.

There are a few factors that work around all these, but you should also note the following before making your vape oil:

  • Never combine vape liquid that contains nicotine with your CBD isolate. It weakens the core qualities of CBD in the vapor and makes it senseless to use.
  • Make sure that your propylene glycol and vegetable glycerine levels are in proportion with your taste.
  • You need CBD isolate to complete your DIY CBD vape oil, so the PG levels need to be sufficient to ensure the crystals dissolve well. The best PG to VG ratio is 70/30.
  • Don’t under any circumstances put your CBD vape oil (vape juice) into a microwave to heat up; it destroys all the properties.
  • Avoid adding scented oils and essential oils to your vape.

Understanding all the fundamental aspects that revolve around the production of CBD oil for vaping is imperative. Note to self: you can’t vape CBD oil.

Let’s start with the key ingredients that go into this amazing liquid for vaping.

See also  Does CBD Oil Help With Neuropathy In Feet

CBD vape oil ingredients

Below are the main ingredients for CBD vaporizer oil:

Vegetable glycerine (carrier oil)

When heating the oils derived from plant material, it forms a sugar substitute called vegetable glycerine (VG).

It does contain hints of sweetness but not enough to make the vape juice sweet. Most e-cig juices contain vegetable glycerine because it produces the thick cloud of smoke that users love.

VG doesn’t give the user much of a throat hit—a feeling experienced during inhalation that replicates smoking.

Propylene glycol (carrier oil)

Propylene glycol (PG) is an alcohol-based carrier oil that maintains the vape oil (juice) flavor. The vapors’ consistency is much thinner than that produced from a VG dominant liquid, but the throat hit is much stronger.

The presence of propylene glycol in CBD vaporizer oil acts as a preservative and prolongs its shelf life.

Medium-chain triglyceride (MCT) carrier oil

MCT oils are fats extracted from coconut oil through a process called fractionation. Despite being flavorless and odorless, this carrier oil is perfect for CBD vape oil (juice). It assists with promoting weight loss, provides a good sense of energy, and increases gut health.


These are the natural aromas and flavors extracted from plants. In cannabis crops, terpenes form part of the cannabinoid profile, along with CBD and THC.

The best CBD vape oils are the ones that carry favorable smells and flavors, all thanks to the terpene percentage the e-liquid holds.


After purchasing the best vaping device on the market, the greatest part is the flavors you enjoy from your juice. Most people consume hemp oil for health benefits, but that doesn’t mean it has to be flavorless or taste like medicine.

You can still pump up your DIY CBD vape oil with over 7,000 flavors to choose from—some are natural, while others are artificial.

CBD isolate or full-spectrum CBD

Probably the most essential CBD vape oil ingredient is the CBD isolate. That’s if you’re looking for a vape juice that contains zero THC properties. It’s the purest form of cannabidiol extracted from cannabis plants via a purification process.

When you make CBD vape oil, adding terpenes provides the flavors and aromas since CBD isolate doesn’t contain any. To save time, get your isolate powder from a reputable online store or cannabis dispensary.

For full-spectrum CBD, the entire marijuana plant is dried and used to include all its properties in the oil. The THC level is usually 0.03%, which is the legal limit to add to vape oil (juice).

CBD and THC compounds work well together rather than apart, but you still won’t get a CBD vape oil high. You’ll experience what users call the “entourage effect” when consuming both in a product.

Since we’re here for the most CBD vape oil benefits, we suggest you stick with the CBD isolate recipe.

The recipe (CBD isolate way)

Now you’ve gathered your materials, let’s find out how to make CBD oil for vaping. As previously mentioned, CBD isolate doesn’t contain any form of THC. If you want to have the small 0.3% in your vape juice, then opt for full-spectrum CBD.

CBD vape oil (juice) recipe

This recipe is for 30 ml of CBD vaporizer oil.

The key ingredients are:

  • 15 ml propylene glycol
  • 12 ml vegetable glycerin
  • 3 ml of your selected flavors and terpenes
  • 500 mg CBD isolate powder
  • A digital scale
  • An empty vape juice container
  • A clean syringe
  1. Using a syringe, add 15 ml of propylene glycol into the empty vape juice container.
  2. Measure out 500 mg of CBD isolate powder and add it into the container.
  3. Gently shake the mix to blend the powder and PG until no solid particles are visible.
  4. Add 12 ml of vegetable glycerine with the syringe and gently shake it again until all three components are well blended.
  5. Add in your terpenes and flavorings and give the container another shake.
  6. Draw 30 ml of vape juice into the syringe and deposit it into your vape. If you have leftovers, store them in a cool, dark, and dry place.

CBD vaping! Follow the cloud

CBD vape oil (juice) is trending, and you can get in on it. With your newfound knowledge of how to make CBD vape oil—it’s time to get creative. Plunge into making your e-liquid containing CBD properties and enjoy the great benefits wherever you are.

Appreciate the fast impact after each puff as a sense of calm and relaxation overcomes you. Consume your CBD vaporizer oil using modern devices and take your flavored cloud wherever you go.

Head to Homegrown Cannabis Co. and subscribe to our newsletter or follow our social channels to share your CBD vaping experiences with other like-minded connoisseurs. While you’re there, browse through the seed bank and check out the amazing CBD dominant strains to start growing your own today.

About the author: Parker Curtis

Parker Curtis has around a decade of cannabis-growing experience, specialising in soil-less and hydro grows. He’s mastering outdoor, greenhouse, and indoor grows.

How useful was this post?

Click on a star to rate it!

Average rating 5 / 5. Vote count: 1

No votes so far! Be the first to rate this post.